|
8 سال پیش | |
---|---|---|
.. | ||
README.md | 8 سال پیش | |
Wake_on_lan.py | 8 سال پیش | |
__init__.py | 8 سال پیش |
Allows a computer to be turned on or awakened from the WOL protocol by Kalliope.
parameter | required | default | choices | comment |
---|---|---|---|---|
mac_address | yes | Mac address of the target PC to wake up. Accepted format: 'ff.ff.ff.ff.ff.ff', '00-00-00-00-00-00', 'FFFFFFFFFFFF' | ||
broadcast_address | no | 255.255.255.255 | Broadcast address where the magic packet will bee sent. By default on most LAN is 255.255.255.255 | |
port | no | 9 | The magic packet is typically sent as a UDP datagram to port 0,6 7 or 9. This parameter must be an integer. Do not add 'quotes' in your configuration |
None
Kalliope will send a magic packet to the mac address 00-00-00-00-00-00
- name: "wake my PC"
neurons:
- wake_on_lan:
mac_address: "00-00-00-00-00-00"
signals:
- order: "wake my PC"
If your broadcast address is not 255.255.255.255, or if your ethernet card does not listen on the standard 9 port, you can override default parameters. In the following example, we suppose that kalliope is on a local areal network 172.16.0.0/16. The broadcast address would be 172.16.255.255.
- name: "wake my PC"
neurons:
- wake_on_lan:
mac_address: "00-00-00-00-00-00"
broadcast_address: "172.16.255.255"
port: 7
signals:
- order: "wake my PC"
Note: The target computer must be on the same local area network as Kalliope.
Note: The target computer must has wake on lan activated in BIOS settings and my be in OS settings too.